Gravel throw and underbody protection - GRVLGUA/UNDRCOAT-BLACK-1LTR

Gravel throw and underbody protection

Name: Gravel throw and underbody protection
Brand: Würth
SKU: 0892075200

Gravel guard and undercoating
GRVLGUA/UNDRCOAT-BLACK-1LTR

Art.-no. 0892075200

EAN 4052703194957

All versions

Individual price display after login

Gravel throw and underbody protection

Art.-no. 0892075200

Individual price display after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

Rubber-based coating compound containing solvents, can be painted over

Excellent adhesion, quick skin formation

Scratch-resistant

Can be painted over with many commercially available, solvent-based and water-based 1-component and 2-component top coat paints

Suitable for oven drying briefly at 40 °C to 60 °C

Very easy to sand once completely dry

Tip for pros

Different textures can be sprayed by changing the distance or pressure applied

The colour darkens when clear coat is applied

Notice

Do not spray on joints, engines, gears or brake systems. After use, turn the can upside down and spray until the valve is empty. Not miscible with thinners, water or paints. The product can be painted over within 24 hours. It can then only be painted once it has been sanded and cleaned.

Application area

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For repairing and restoring the original structure and for protecting against stone chips and corrosion in all visible areas, e.g. front and rear aprons, side members, bumpers and chassis on cars, trucks and buses. Ideally suited for use as an anti-humming compound for wheel wells and chassis.

Instructions

Shake well before use. The base material must be clean, dry and free from rust and dust. Spray a very thin first coat for improved adhesion and let it flash off for approx. 3 minutes. Then apply the next coat. Allow each intermediate coat to flash off. Operating pressure: 2-4 bar. Optimum spraying distance: 30 cm. Optimum spraying results are achieved at a processing temperature of 15-25 °C.

Chemical basis	Natural rubber
Contents	1000 ml
Weight of content	1080 g
Colour	Black
Max. processing temperature	25 °C
Max. pressure	4 bar
Max. temperature conditions	60 °C
Min./max. temperature conditions	10 to 60 °C
Min. pressure	2 bar
Min./max. spraying distance	20-30 cm
Can be varnished after	1 h
Drying time/conditions	2 h / at 20°C and 65% relative humidity
Conditions for drying time	at 20°C and 65% relative humidity
Min./max. temperature resistance	-40 to 90 °C
Shelf life from production/conditions	24 Month / at 10°C to 30°C
Conditions to maintain shelf life from production	at 10°C to 30°C

Required accessory:

Product

Description

Quantity

Price
/PU

UBSSPRGUN-R1/4IN-BOTTLE-1LTR

Art.-no. 08911063

For applying stone chip and underseal products containing solvents.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU

UBSSPRGUN-R1/4IN-BOTTLE-1LTR

Art.-no. 08911063

For applying stone chip and underseal products containing solvents.

x 1 pcs

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 4

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.